PERANCANGAN STRUKTUR BETON BERTULANG KANTOR SEWA 6 LANTAI JALAN AHMAD YANI KOTA PONTIANAK

Jihan Sudoko; iwan Supardi; Hartanto Wahyu Sasongko; Erni Puji Muliati

doi:10.31573/retensi.v3i2.653

Jihan Sudoko Politeknik Negeri Pontianak
iwan Supardi
Hartanto Wahyu Sasongko
Erni Puji Muliati

DOI: https://doi.org/10.31573/retensi.v3i2.653

Abstract

This rental office building is designed to be built on Road Ahmad Yani, Pontianak City. Thei buildingi structure is designed usingi the Speciali Moment Resistant Framei Structure systemi (SPRMK) based on SNIi 03-2487-2013 (Requirementsi for Structurali Concretei fori Buildings). Analysis ofi earthquakei loads usingi the spectrum design methodi based on SNIi 1726-2019i (Earthquakei Resistance Planningi Proceduresi for Buildingi and Non-Buildingi Structures) for the locationi of earthquake accelerationi using the cityi ofi Tarakan. iPPPURG 2847-1989 (Guidelines for Loading Planning for Houses and Buildings) and PPPURG 1987 (Guidelines for Loading Planning for Housesi and Buildings) fori loading. In thei analysis, thei loading systemi that will be imposedi on the building isi a vertical loadingi systemi in the formi of dead andi livei loads and horizontal loads in thei form ofi earthquakei loads and structurali analysisi assistedi by computeri programmers. From the structurali analysis, it can be concludedi that the dimensionsi of the crossi section andi reinforcementi are obtained.

References

[1] Azmi, Wibowo dan Lubis, “Studi Tentang Perancangan Kantor Sewa Di Kota Pontianak”, Universitas Tanjung Pura, Pontianak 2013.
[2] Ali Asroni, “Balok dan Pelat Beton Bertulang”, Graha Ilmu, Yogyakarta 2010.
[3] Lassey, William R. ,”Planning in Rural Evironments”, McGraw-Hill, Inc: United States of America 1977.
[4] (BSN) Badan Standarisasi Nasional, SNI 2847-2019 “Tata Cara Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung dan Non Gedung”, Badan Standarisasi Nasional, Jakarta 2019.
[5] (BSN) Badan Standarisasi Nasional, SNI 1727-2020 “Beban Desain Minimum dan Kriteria Terkait Untuk Bangunan Gedung dan Struktur Lain”, Badan Standarisasi Nasional, Jakarta 2020.
[6] Depatemen Pekerjaan Umum, "Peraturan Pembebanan Indonesia Untuk Gedung", Yayasan Badan Penerbit PU, Jakarta 1987.
[7] (BSN) Badan Standarisasi Nasional, SNI 2847-2013 “Persyaratan Beton Struktural Untuk Bangunan Gedung”, Badan Standarisasi Nasional, Jakarta 2013.
[8] (BSN) Badan Standarisasi Nasional PPURG 2847-1989, “Pedoman Perencanaan Pembebanan Untuk Rumah dan Gedung”, Badan Standarisasi Nasional 1989.
[9] Departemen Pekerjaan Umum, SNI 03-2847-2002, “Tata Cara Perhitungan Struktur Beton Untuk Bangunan Gedung”, Yayasan Badan Penerbit PU, Bandung 2002
[10] Dipohusodo, Istimawan I, “Struktur Beton Bertulang Berdasarkan SK. SNI T-15-1991-03”, PT Gramedia Pustaka Utama, Jakarta 1994.
[11] Nawy, “Beton Bertulang Suatu Pendekatan Dasar”, Erlangga, Jakarta 1990.
[12] Ali Asroni, “Teori dan Desain Kolom Fondasi Balok T Beton Bertulang Berdasarkan SNI 2847-2013”, Muhammadiyah University Press, Jawa Tengah 2018.
[13] Ali Asroni, “Kolom, Fondadi dan Balok T Beton Bertulang”, Graha Ilmu, Yogyakarta 2010.